silver set

Create an entire jewelry collection perfect for any occasion.

Bracelet

Materials:

• 24 gauge Silver plated Non-tarnish Artistic Wire - 1 spool
• Sterling Silver Square Magnetic Clasp - 1 clasp
• Sterling Silver Fancy Connectors - about 4 connectors
• 5mm Sterling Silver Beads - about 5 beads
• Soft Flex® Chain Nose Pliers
• Soft Flex® Round Nose Pliers
• Soft Flex® Flush Cutters

Steps:

1. Use Soft Flex® Flush Cutters to cut 2 inches of wire to form a wire wrapped loop that attaches to one half of the clasp. String 1 Sterling Silver Bead and form a wire wrapped loop that attaches to 1 connector.
    
2. Use 2 inches of wire to form a wire wrapped loop that attaches to the other side of the connector. String 1 Sterling Silver Bead and form a wire wrapped loop that attaches to another connector.
    
3. Repeat Step 2 three times, attaching the final wire wrapped loop to the other half of the clasp.

Chandelier Earrings

Materials:

• 24 gauge Silver plated Non-tarnish Artistic Wire - 1 spool
• Sterling Silver Fancy Connectors - 2 connectors
• 5mm Sterling Silver Beads - 16 beads
• Round Post Earring - 1 Pair
• Soft Flex® Chain Nose Pliers
• Soft Flex® Round Nose Pliers
• Soft Flex® Flush Cutters

Steps:

1. Use Soft Flex® Flush Cutters to cut 2 inches of wire. Form a wire wrapped loop that attaches to 1 Earring Post. String 1 Sterling Silver bead and form a wire wrapped loop.
    
2. Use 2 inches of wire to form a wire wrapped loop that attaches to the previous wire wrapped loop. String 1 Sterling Silver bead and form a wrapped loop that attaches to one end of 1 connector.
    
3. Repeat Step 1. Repeat Step 2, attaching the final wire wrapped loop to the other end of the connector.
    
4. Use 2 inches of wire to form a wire wrapped loop that attaches to the bottom left hole of the connector. String 1 Sterling Silver bead and wrap the wire up and around the bead and around the wire above the bead.
    
5. Repeat Step 4 attaching the wire to the left middle hole of the connector. Repeat Step 4 attaching the wire to the right middle hole of the connector. Repeat Step 4 attaching the wire to the bottom right hole of the connector.
    
6. Repeat Steps 1-5 to create a second earring.

Dangle Earrings

Materials:

• 24 gauge Silver plated Non-tarnish Artistic Wire - 1 spool
• Sterling Silver Fancy Connectors - 2 connectors
• 5mm Sterling Silver Beads - 6 beads
• Round Post Earring - 1 Pair
• Fancy Head Pins - 2 Pins
• Soft Flex® Chain Nose Pliers
• Soft Flex® Round Nose Pliers
• Soft Flex® Flush Cutters

Steps:

1. Use Soft Flex® Flush Cutters to cut 2 inches of wire from the spool. Form a wire wrapped loop that attaches to 1 Earring Post. String 1 Sterling Silver bead and form a wrapped loop that attaches to the top hole of one connector.
    
2. Use 2 inches of wire to form a wire wrapped loop that attaches to the bottom hole of the connector. String 1 Sterling Silver Bead and form a wire wrapped loop.
    
3. Use 1 Fancy Head Pin to string 1 Sterling Silver bead. Form a wire wrapped loop that attaches to the second wire wrapped loop formed in Step 2.
    
4. Repeat Steps 1-3 to create a second earring.